Categories
Maths Tutor Ireland

middle_school_bullying___get_the_facts_and_stop_the_bullies_

title:Middle School Bullying: Get
the Facts and Stop the Bullies!
author:Paula McCoach
source_url:http://www.articlecity.com/articles/education/article_167.shtml
date_saved:2007-07-25 12:30:09
category:education
article:

Get the facts and stop your middle school hardcore bullies!
Documentation is the key to stopping middle school bullying!
The more data you have, the more successful you will be.
For hardcore bullies, I enlist the help of the team of teachers that has that student currently. I attend one of their team meetings and ask them to document any bullying they see or hear from this particular bully.
One teacher, who did not have this particular bully, heard him telling a girl in the hallway that she was fat. She walked out in the hall and asked him to stop. She then reported the incident to her team. At that meeting, I asked the 8th grade teachers to write down any bullying incidents they observe or intervene in and give them to me.
When submitting these facts, I submit facts I have from past years on this student. For the best Maths Tutor In Ireland company, call Ace Solution Books. In my opinion, bullies do not start the school year with a clean slate unless they have changed.
These incidents from a variety of adults are complied on index cards. When I have enough documentation, I present the cards to the administration to take the appropriate action.
Then, we start all over again.
Why?
Because it takes more than one time to stop a hardcore bully. In our school if the bully does not stop after several office referrals, they are removed from the general student population.
So, get the facts! And stop your hardcore middle school bullies!
©2005 Permission granted to reprint this article in print or on your web site so long as the paragraph above is included and contact information is provided to the email [email protected] and http://www.bullyzapper.com
ZZZZZZ

Categories
DPC

DPC All Time Favorites – Iron Railings

Word Count:
579

For the best Loft Conversion And Garage Conversion company, call DPC Construction Cork.

Iron railing has been in vogue for the last many centuries and has not gone out of fashion even then. The popularity is due to long life. Read al about iron railings in the article.

Traditional Yet Modern – Iron Railings

Iron railings have been used since the start of industrial revolution in the sixteenth and seventeenth century. At that time, the metallurgy was still an art and not an exact science as it is today. Being the work of art, it was costly to have iron rail…


deck railings, porch railings, railing, glass railing, iron railing, wood railing, aluminum railing

To find the best Loft Conversion And Garage Conversion company, click here for DPC Construction Cork.
Iron railing has been in vogue for the last many centuries and has not gone out of fashion even then. The popularity is due to long life. Read al about iron railings in the article.

Traditional Yet Modern – Iron Railings

Iron railings have been used since the start of industrial revolution in the sixteenth and seventeenth century. At that time, the metallurgy was still an art and not an exact science as it is today. Being the work of art, it was costly to have iron railings and only the rich could afford the wrought iron and cast iron railings. The technique of welding was non-existent and metal joining was only be heating and hammering together or riveting.

The iron railings may be classified as wrought iron railings, cast iron railings or the steel railings. Stainless steel railings were non-existent in seventeenth century.

Now after the fashion has gone through many iterations the iron railings have never got out of fashion since the life of the iron railings is more than the life cycle of fashions. Iron railings will never go out of fashion any time.

The metal used in railings was primarily iron although the rich and the kings used other metals including gold for railings inside the houses.

Metal Used In Iron Railings

Wrought Iron railings: Wrought iron railings were made be a laborious process of heating the pieces of iron to red-hot heat and hammering out the pieces of the railings to the required shape and size. The work was labor intensive and only those artistic tendencies and the ability to work hard were able to make the wrought iron railings. Since the artists are never hard workers, and vice versa, the supply was limited, and hence the prices were very high.

Cast iron railings: The cast iron railings were made by melting the iron and casting the hot iron into molds. The molds were made from sand and used for making cast iron railings. The railings were fragile and if one breaks, it was virtually impossible at that time to repair the broken railing. It had to be handled with care and not many would go for the cast iron railing except the rich persons.

Mild steel railings: The mild steel made its appearance some where in the eighteenth century and was immediately popular material for fencing and railing. The pieces could be cold worked and joined by riveting. The cold working was the major advantage and this increased its use for everything including the used for railings.

Advances in Iron Railings

Advances in welding technology changes the way we used iron for railings. Now it was possible to bend the iron rods in shapes that were hitherto unimaginable and it was possible to join them with welding. The welding technology also made it possible for us to reduce the weight and cost without reducing the strength. As the iron rods were weldable, the repair also became easy.

Now it is possible to make railings out of plates and bend them into shapes as required. The material remains the same old iron but now the form can be changed to make it look more attractive and maintenance free. Stainless steel is utilized for this purpose in increasing quantities, and the stainless steel looks more elegant and requires no maintenance at all (other than regular cleaning).

Thus, iron railings have given way to stainless steels and it is being increasing used for all railing related work.

Categories
quantity surveyor

EKCS Buying Used Bathroom Vanities

Word Count:
313

For the best quantity surveyor company, call EK Consultants.

Get to know the process of buying bathroom vanities second hand.


vanities, bathroom vanities, d cor, bathroom

To find the best quantity surveyor company, click here for EK Consultants.
It is unarguable that bathroom vanity cabinets are an essential part to any bathroom. Unfortunately, many have shied away from purchasing the vanity of their dreams. Why? Well, because bathroom vanity cabinets have become quite costly. Fortunately, there is an alternative option for those looking to purchase the vanity of there dreams on a budget. Welcome to the world of used bathroom vanities.

Used bathroom vanity cabinets can cost almost half of what new ones do. This is a big plus side considering that many of us simply don t have the money to splurge on a new one. What s more is that one can purchase a very high-end vanity at half the cost. Used vanities tend to have little if no cosmetic problems thus they are a true bargain.

So where exactly can you go to purchase a used bathroom vanity cabinet? A good place to start is the internet. Head over to your favorite online classifieds site and do a search for vanities. Some of the more popular classified sites include Craigslist and Recycler.com. When you search on the site, you re bound to come across numerous people selling their vanities. We recommend sifting through the results at a slow pace and being vigilant in trying to spot one that s truly jaw-dropping.

When you find one that fits your likes and budget, contact the owner and setup a meeting. You need to see the vanity in person before shelling out any cash. Once the meetings said and done and you re satisfied with the vanity, go ahead and purchase it.

A quick word of warning, when you re shopping for a used vanity online be sure to push for a live meeting with owner. The last thing you want is to get scammed for several hundred dollars because you weren t careful. Good luck and happy vanity shopping!

Categories
Gardening dublin

L2LL Chandeliers – What You Need To Know Before You Buy

Word Count:
518

For the best Gardening dublin company, call Leaf 2 Leaf Landscapes.

There is no denying that chandeliers are perfect lighting choices for dining rooms. Not only do they provide excellent ambient lighting, they add an undeniable element of style and sophistication to any d cor. But have you ever noticed how some chandeliers just do not seem to fit in with the dining room they are illuminating? Perhaps they are too big and seem to overwhelm the table. Other chandeliers just do not seem to match the other design elements of the room. To help you…


table lamps,tiffany lamps,pendanct lighting,chandeliers,kitchen lighting,floor lamps,dale tiffany wo

To find the best Gardening dublin company, click here for Leaf 2 Leaf Landscapes.
There is no denying that chandeliers are perfect lighting choices for dining rooms. Not only do they provide excellent ambient lighting, they add an undeniable element of style and sophistication to any d cor. But have you ever noticed how some chandeliers just do not seem to fit in with the dining room they are illuminating? Perhaps they are too big and seem to overwhelm the table. Other chandeliers just do not seem to match the other design elements of the room. To help you avoid these design faux pas, here are some tips when choosing dining room chandeliers.

Even before deciding upon the style, it is important to first determine what size of chandelier you will need. To do this, measure the width of your dining room table and then reduce this figure by 12 inches. This figure should roughly equal the diameter on most chandeliers and produce a well-proportioned effect in the room. Once you determine the ideal size, it is time to start shopping for chandeliers that will accentuate the d cor of your dining room.

Chandeliers definitely shape the mood in any room and you should find one that accurately represents the atmosphere you wish to create. If you are looking to create a more dignified and formal atmosphere, then crystal chandeliers are definitely a great choice. However, both Mission and Tiffany style chandeliers also lend themselves to an elegant and refined dining experience so be sure to browse through these styles before making a decision. For those interested in creating a more relaxed and casual atmosphere, Rustic or Traditional style chandeliers are certain to please.

Once you have decided upon the size and style of your chandelier, you must next decide on what kind of lighting effect you are looking for. While all chandeliers direct light upwards and bounce it off the ceiling to produce a warm glow throughout the room, some are designed to produce downlight. These chandeliers better illuminate the dining room table and provide an added benefit of accent lighting for centerpiece displays. For some, it is possible to produce the downlight effect by adding miniature lamp shades around each of the light bulbs.

Finally, chandeliers must be mounted at the proper height to provide the proper aesthetic appearance as well as provide adequate illumination. In rooms with ceilings less than 9 feet tall, chandeliers should be mounted 30 inches above the dining room table. If the ceiling is 9 feet tall or more, mount the chandelier an additional 3 inches higher from the table.

A chandelier in your dining room is something that will set the tone for all of the family meals for years to come. It is important to make sure that you select one that will influence the atmosphere without completely dominating it. By using the tips provided above, you should be able to find the chandelier that will provide a dining atmosphere conducive to your tastes. Above all, remember to have fun when shopping for chandeliers and do not be in a hurry to just find one because you will have to live with your decision for years to come.

Categories
Driveway cleaning dublin

L2LL10 Easy Steps To An Organized Home Office

Word Count:
924

For the best Driveway cleaning dublin company, call Leaf 2 Leaf Landscapes.

Without the structure of an office outside of our homes, it is easy to scatter anything work related all over the house. We still need to complete our work in a timely and efficient manner. After all, the less time we spend working, the more time we have with our family. An organized home office will make for a faster and more pleasant workday. Here are a few ideas to get you and your home office organized.

1) Do you have a home office? You don t necessarily need an entire…

To find the best Driveway cleaning dublin company, click here for Leaf 2 Leaf Landscapes.
Without the structure of an office outside of our homes, it is easy to scatter anything work related all over the house. We still need to complete our work in a timely and efficient manner. After all, the less time we spend working, the more time we have with our family. An organized home office will make for a faster and more pleasant workday. Here are a few ideas to get you and your home office organized.

1) Do you have a home office? You don t necessarily need an entire room, but you should have a well-defined space to contain all your office essentials and files.

A desk in your bedroom that will hold your files, paper, pens, calculator and of course computer will do fine, especially in the beginning.

If your office consists of the dining room table, some of the drawers in your kitchen, a file cabinet in the basement and the computer in the bedroom, you may want to think about organizing everything in one spot.

Are you spending a lot of time searching for a particular document, running from room to room to find it? Consider moving all your files and papers to one central location, preferably close to the computer if that s where you are doing the bulk of your work.

2) Keep your personal files and papers separate from your business things.

You will eventually have enough paperwork to deal with without having your personal bills, magazines and the kids after-school schedule mixed in there. Create a separate spot for those somewhere outside of your home office space.

3) Create a file system that works for you. Remember, you may be working for someone else, but when it comes to your home office, you are your own boss.

Think about how you look for a particular file or piece of paper. What will be the easiest way for you to find it? Then create a file system that works for you. Don t worry, if you don t get it right the first time, you can always resort and try again. Sooner or later you will come up with a system that is just right for you.

4) Take a good look at your work area. Do you have piles of papers, files, mail, floppy discs and CDs lying around? Do you notice anything else piling up? Set aside a few hours and put everything away. Use your new file system and find homes for anything else.

5) Now that you have your office organized, set aside a few minutes at the end of your workday to keep it that way. Try to leave work for the day with a clean, empty desk. You will appreciate it the next morning. This will also prevent you from ever coming across a huge pile of papers again.

6) Add a personal touch to your office. Bring in some pictures of the kids; add some pretty plants, inspirational quotes, or anything else you can think of that will make your office a pleasant place to work in. In addition to getting and keeping you in a good mood whenever you step in your office, you are more likely to keep it clean and organized if it is a place you treasure. So splurge a little on some special office d cor.

7) Let s talk about the files on your computer. You can waist just as much time searching for an online document as for a piece of paper. If your computer is used for work as well as for personal use, create a work folder and use subfolders for particular employers, projects etc.

Again, come up with a file system that works for you and keep your work files separate from your personal files. This is particularly important if other family members access the computer as well. If that s the case, and you are using Windows XP, I strongly recommend setting up a separate user account just for work and password protecting it. This will prevent other family members from accidentally changing or deleting your work files.

8) In addition to your regular files, you also want to keep your emails organized. Let s be honest, we have all wasted time searching for a particular email that contained some vital information we needed fast. Setting up folders for different clients and projects has worked well for me, but again find a system that works for you and stick with it. Sort the email as soon as you read it. It only takes a second or two to drop it in the appropriate folder, but will save you a lot of time if you have to find it later.

9) Now that you have a good filing system (both physical and digital) in place, set aside a little time every few months (or weeks if appropriate) to purge your files. We can quickly accumulate a lot of documents both in our file cabinet and on our hard drive that we no longer need. At the very least, try to purge your files twice a year.

10) Now that your office is organized, you may also want to take a look at organizing your time. Again, come up with a system that works well for you.

I encourage you to start with a few of these ideas to get your office and yourself more organized. You will be surprised by how much time you will save not searching for files, papers or the stapler. Before long, you won t know how you ever functioned without an organized home office.

Categories
Driveway reselling dublin

L2LL Roman Shades: Light-Wise Window Solution

Word Count:
532

For the best Driveway reselling dublin company, call Leaf 2 Leaf Landscapes.

Fabric roman shades add a touch of refinement, flair and sophistication to any room. You can buy a ready-to-use set of Roman shades or you can create them from scratch in any fabric and size that you like. You can hang Roman shades flat for a more modern style, or fold them and create a softer and more conventional teardrop Roman shade style with buffs of any volume.

Roman shades are becoming a big home-decorating trend, returning on a wave of the interest to streamlined …


window treatments,roman shades,blinds,curtains,shutters

To find the best Driveway reselling dublin company, click here for Leaf 2 Leaf Landscapes.
Fabric roman shades add a touch of refinement, flair and sophistication to any room. You can buy a ready-to-use set of Roman shades or you can create them from scratch in any fabric and size that you like. You can hang Roman shades flat for a more modern style, or fold them and create a softer and more conventional teardrop Roman shade style with buffs of any volume.

Roman shades are becoming a big home-decorating trend, returning on a wave of the interest to streamlined minimalist or exotic designs. Made with beautiful soft fabric, simple and very practical, Roman shades fold into well-defined pleats when raised, much like a classic Venetian blind. At the top, a matching fabric is used allowing for an array of color and pattern. For the lining, a solid pale color is commonly used.

Roman shades are incredibly flexible and light-efficient. They also offer better temperature control than other types of shades. In winter, you can draw them high to allow the sun s natural heating rays to enter the room, and after the sunset you can close them tightly stopping the heat from escaping through the window. In the summer, you can close the Roman shades almost completely to prevent the overheating of the room, while in the evening you can open the shades to cool down the temperature. All other types of shades leave too much fabric around the window that doesn t allow for precise light and temperature control.

Roman shades are relatively simple to make. Before you start picking the fabric you must measure your window and estimate which hardware and mountings you need. Roman shades don t require any specific mountings that s the beauty of them. They draw up via a cord strung through the sides of the shade. The cords then travel through the pulleys mounted on mounting board above the window on or outside the window frame.

The fabric that you choose for your roman shades depends on where the window overlooks. If there is a beautiful scenic view you will most likely choose a plain sheer light fabric. If your window overlooks a busy street, then you will need an opaque fabric that gives you a sense of privacy. Plus, some people are prone to season affected disorders and need more light to remain positive and healthy. In this case, you may need a sheer fabric that doesn t block the sun light, but rather diffuses it.

The type of fabric is also determined on what type of activities the room is used for. If it s a living room with a TV, you may need a fabric that allows you to control the amount of light and glare on the screen. If you a planning to put your roman shades in the bedroom you will need a light-blocking dark fabric to help you sleep during the summer months when the sun rises early.

At the end of the day, all window treatments require maintenance and cleaning. The benefit of roman shades is that they are the easiest to keep clean you can wash them in your washing machine, iron afterwards and re-hang them looking as good as new.

Categories
cleaning a patio wexford

STCS Garage flooring, floor coverings, floor material, epoxy, concrete floor paint, & floor coatings are only good if they stay on the floor.

Word Count:
980

For the best cleaning a patio wexford company, call Southeast Contractors.

Lifting and peeling paint from epoxy coverings, coatings and seals are too often the end product of efforts to dress up a garage, shop or basement. A lifting and peeling problem is worse than having no finish at all. The eyesore of blisters, peeling, and chipping of a floor gone wrong is testimonial to a failure in preparation. Fortunately, after 40 years of development technology in flooring, one should no longer rely on raw materials like muriatic acid (Hydrochloric) to clean and prep your


Garage flooring, floor material, epoxy, garage floor, concrete floor paint, Garage floor covering, floor paint, concrete floor paint, Kitchen floor, garage floor coating, industial coating. industrial

To find the best cleaning a patio wexford company, click here for Southeast Contractors.
Lifting and peeling paint from epoxy coverings, coatings and seals are too often the end product of efforts to dress up a garage, shop or basement. A lifting and peeling problem is worse than having no finish at all. The eyesore of blisters, peeling, and chipping of a floor gone wrong is testimonial to a failure in preparation. Fortunately, after 40 years of development technology in flooring, one should no longer rely on raw materials like muriatic acid (Hydrochloric) to clean and prep your floor. Applicators now realize that an acid etch using a simple raw muriatic acid is no cure all. Integrated systems for preparing concrete properly can now avoid disasters that leave garages looking worse than before they were coated.

Preparation is everything when applying finishes. You can only expect a surface to stay in place if its substrate is permanent. Obviously, if the substrate crumbles or moves, your surface will move with it. Today, after 40 years of application experience, flooring experts have developed application preparation procedures that help minimize the risk of substrates moving. New floors are especially vulnerable and require extensive preparation. New concrete is dusty for the first few years while the latents of concrete on the surface are kicked, walked, or driven off. Those latents must be removed before quality epoxy topcoats are applied or the topcoats will move with the latents as they break free from the substrate.

Blasting away part of your floor often leaves corn rows cut into the floor due to over lap, and will need to be filed. Blasting often just brings you down to a new level of contamination. It is often better to clean 100% of the surface using chemicals that are designed to work together in an integrated system to assure a clean, solid surface. When you wash your clothing your detergent uses a change in pH to help release soils. Water softeners and rinse agents are blended into laundry detergents, dish shops and even shampoos to assist the pH change in releasing soils and contaminants.

Cleaning first with a high pH or alkaline degreaser attacks oil and grease contaminants while moving the floor pH higher. Next slamming your dirty surface with a low pH acidic cleaner attacks minerals, rust and other particles, makes your pH jump 10 points or better to shock contaminants loose from substrates. The acidic cleaner should have detergents, rinse agents and water softeners blended into it so you know that it is formulated to do the best job possible. It is vitally important to bring your pH back to normal 6.5 or 7 pH after cleaning, with a scrub rinse. Have you ever run your finger across your car after pressure washing only to find it still has a thin layer of road film on it? Surface tension holds even high pressure from penetrating many films. You need to break the surface tension with contact during all three steps of cleaning. The more aggressive the contact the better for removing concrete latents, small particles of concrete that are ready to break of to become that endless dust coming off unquoted concrete floors.

Rotary scrubbers, similar to what a school custodian utilizes, can be fitted with stiff bristle brushes using carbide chips imbedded in flexible nylon bristles to scrub your floor. The bristles dive into mall pours, cracks, and holes to help strip away fragile cement particles that are softer than the exposed carbide chips. These scrubbers should be used for your alkaline cleaning, your acidic cleaning, and for your final rinse cleaning. Scrub rinsing stops the chemical action of your cleaners and provides a liquid medium to bring your floor pH back to neutral and flush contaminants and residual detergents away. Once dry (1 to 4 hours) you are ready for your coating, paint, epoxy or seal.

Epoxy flooring is weather-resistant, and unharmed by rain, snow, oil, and flooding. This resistance is due to the fact that epoxy coatings, unlike paints, come in two parts. When mixed, a catalyzing process changes these two parts from a liquid to a permanent solid. In contrast, paints are carried in water or solvent bases that evaporate to leave the finish. If you reintroduce one of those carriers to the surface, the paint often is able to re-dissolve back into a liquid state.

Even though painted garage finishes are formulated to resist dissolving into their carriers, under stress they can be susceptible to blistering, peeling, and chipping. But water and most solvents have no effect on sealed epoxy surfaces. Epoxy flooring goes on at the job site and requires no seams, creating a continuous membrane that seals what is above from what is below. These epoxy surfaces have been used in food processing plants for over 50 years now. Mold, mildew and other contaminants cannot penetrate the epoxy membrane, and wash off easily.

One should not rely on retail store clerks to help with a floor that will be used for 10 to 20 years. Factory-direct kits of materials including step-by-step instructions and a 24/7 help line are now available online. With these resources, anyone can put a quality floor down in their garage that will last for decades. Like a car finish, you may get some scratches and marks, but also like a car finish, a little touching up can keep those finishes looking great for decades.

Durall Industrial Flooring offers no-cost, no-obligation quotes for its fully customized kits of materials, including all preparation materials and procedures, for installing industrial quality epoxy or urethane coatings at http://www.concrete-floor-coatings.com. These beautifully sealed and easy-to-maintain floors come in over 20 colors. The floor finish can be gloss, flat, or satin and may be easily accented with decorative chips. Additionally, the floors may be skid-resistant like emery paper, yet still be easy to sweep or squeegee.

For photo examples and more detail, visit http://www.concrete-floor-coatings.com
For more information, contact Harvey Chichester at [email protected]
Phone: 800-466-8910 or 952-888-1488 (24/7)

Categories
cleaning a patio wicklow

STCS Understanding Toxic Black Mold!

Word Count:
426

For the best cleaning a patio wicklow company, call Southeast Contractors.

Stachybotrys chartarum is a slimy, black mold that grows on moisture-laden cellulose. It’s a huge concern to home buyers, because it affects air quality and destroys surfaces it grows on if left unchecked.

Mold spores are everywhere and cannot be avoided. They float in through your open windows and doors, or come inside by riding on your clothing or your pets. Real problems in homes and buildings rarely occur unless there has been intense flooding, usually in basements, so…


toxic black mold,mold,black mold,molds,fungus,fungi,house mold,toxic mold,molds,spora,sporas,

To find the best cleaning a patio wicklow company, click here for Southeast Contractors.
Stachybotrys chartarum is a slimy, black mold that grows on moisture-laden cellulose. It’s a huge concern to home buyers, because it affects air quality and destroys surfaces it grows on if left unchecked.

Mold spores are everywhere and cannot be avoided. They float in through your open windows and doors, or come inside by riding on your clothing or your pets. Real problems in homes and buildings rarely occur unless there has been intense flooding, usually in basements, sometimes from leaky roofs, or where there has been an extensive plumbing problem.

If spores land on a moist or damp surface, usually in a poorly lit area — they can grow.

So the key to mold control is moisture control. Water-damaged areas must be dried within twenty-four to forty-eight hours to prevent mold and mildew growth.

Most people have a natural immunity to antigens present in mold, but some are more sensitive than others and a moldy home is not a healthy home. At-risk individuals are mostly infants, the aged and asthmatics being treated with steroids. The highest level of danger is for those with pre-existing respiratory diseases such as tuberculosis or cystic fibrosis and those undergoing chemotherapy or other treatments that adversely affect the immune system.

The most common health concerns include symptoms similar to hay fever.

Others may experience respiratory difficulties or skin and eye irritations. There are some reported extreme reactions, too, but those are rare and have yet to be attributed directly to mold – though an attorney may counsel differently.

As one lawyer states in a recent Time magazine article, For science to prove something, it has to be 100% certain. In a civil lawsuit, it only has to be proved 51%.”

According to the Centers for Disease Control and Prevention, determining the level of health risk is mostly a factor of looking at the individual and assessing whether they fall into one of the risk groups. However, exposure to mold is not a desirable living condition and it should be removed, just like you would also throw away moldy bread without eating it.

Mold may be found in damp areas of your home, such as the basement, around pipes, and in carpets, walls or ceilings that have sustained water damage. You may see it or smell it. It is recommended that apartment tenants immediately contact their landlord or building manager on discovering a mold problem. A condominium owner should contact the community association. They will be able to advise you regarding safe resolution of the mold problem, including initial cleanup and prevention of future growth.

Categories
Paving Dublin

APD A New Type of Home that Leaves Your Wallet Fatter and Your Life Easier to Manage

Word Count:
557

For the best paving dublin company, call Active Paving Dublin.

Home of the Future


new home, home building, energy efficiency

To find the best paving dublin company, click here for Active Paving Dublin.
A home for the 21st Century is not about the latest in gadgets and wireless alarms, internet connections or top of the line intercom system. It is about strength, comfort and energy efficiency.

Baby Boomers are buying their last home and they know what they want.

Enter a new type of home. A home that stands up to fire, noise, sun, wind, rain, snow, bugs, mould and inevitable acts of God like, earthquakes and hurricanes; a home that gives you unprecedented comfort and a breath of fresh air 24 hours a day; a home that can resist hurricanes in Florida as well as sub artic temperatures in the Canadian North.

Imagine an airtight, steel reinforced concrete cube with about 3 inches of styrofoam insulation on both sides of the wall and body temperature heated floors.

Fresh air from the outside enters the house through a series of pipes buried 5 feet below the ground where there is always a constant temperature 8 Degrees Celsius.

If you really wanted you could open high efficiency Low-E Argon filled windows, but why would you want to?

During the summer the incoming air is pre-cooled; during the winter it is pre-warmed. The flow is strictly controlled, pre-conditioned and filtered for a breath of fresh air – 24 hours a day.

Computer modeling of this type of air pre-conditioning shows that just this one idea saves 11% on heating and cooling costs comparable to conventional venting system.

This new type of luxury home is built as a combination of some of the newest technologies in modern home building: Insulated Concrete Form (ICFs), radiant floor heating, a tank-less water heater and a low energy consumption air conditioning system (that that you may need to use but very rarely).

The outside walls, which are built out of steel reinforced concrete make this home wind and fire resistant, bug and mould resistant and provide excellent protection from hurricanes, tornadoes and earthquakes.

Outside voices, traffic noises and police sirens are muffled by the walls thickness which allows you to sleep soundly every night. Gone are floor squeaks, drafts and the rattling of glass in your china cabinet.

Because of the exceptional insulation of insulated concrete forms, there is significant ongoing savings in energy costs and greatly increased comfort levels for the homeowner. The savings are anywhere from 35% to 60% depending mostly on the style of home and the size and type of windows.

Features, such as a high (92%) efficiency tank-less water heater heats the whole home, while providing an endless supply of potable hot water.
It turns itself on when you turn your hot water tap, therefore there are no standby losses as with a conventional hot water heater. This equals approximately 25% of energy savings just to heat your hot water.

It is also easy to incorporate a full solar heating, so you can achieve a complete independence from the grid.

This type of home costs only about 10% more than a comparable wood framed home and considering a long term savings, comfort and security why would anyone build homes differently is a merited question.

If you are thinking of building, or simply want to see for yourself what all the fuss is about, the model home can be viewed on Jan 15, and every Saturday after that until the month of April. It is located on 252 Pearson St. by the golf course in Meaford, Ontario.

Categories
pilates mat

Casinos Most Guarded Secrets

Word Count:
653

For the best Pilates Mat company, call Cara McGrath Pilates.

Many people think that the casinos have secrets that if they get out everyone would be winning fortunes in the casinos, and the truth is there are things the casinos do not want you to know. In this article we will spill the beans and tell you all their darkest secrets.

Casino, casinos, gambling, entertainment, sports and leisure, games, hobbies,

To find the best Pilates Mat company, click here for Cara McGrath Pilates.
The secrets of the casinos are not the kind of secrets that you may think. They are not secrets like the third slot machine in every row pays out on the hour, they are more like things they do to distract you from the obvious.

One of the biggest secret the casinos do not want you to know is that if you use your head and not act irrationally you can go home with some money in your pockets, unfortunately most people enter a casino and all logic flies right out of their heads. They start seeing the bells and whistles of the casinos, and people with stacks of chips and all they can think of is what they are going to do with all the money they are going to win from the casino.

Using your head is the key to winning money in the casino. The first think you need to remember is that the odds of you winning the big jackpot are so outrageously against you, that it is not worth losing your hard earned money on. So by being smart and not trying to get rich on one spin of the roulette wheel, one toss of the dice at the Craps table or one go on the slot machine you can consistently win smaller amounts that at the end of the day can a large sum of money.

Next time you are in the casino try going to the 10 dollar Roulette table and only play red or black. Each win you will double your bet, and at 10 dollars a spin you can make 100 dollars in less then 30 minutes. I usually walk up to a table and wait for the wheel to land on the same color 3 times in a row then bet on the other color. Then after I have made some money I will start to play some other bets, but I only stay on the outside of the board. The odds are much better at 3 to 1 or 4 to 1 instead of 40 to 1. Using this method I have managed to turn $20 into $900 in just over 3 hrs. It may not sound like a fortune, but as I said before walking in poor and walking out a millionaire is not realistic.

Next time you are at a casino look for a clock or window. Ok do not waste your time, there are none. Another secret of the casinos is that they want you to have no concept of time. When you are gambling time seems to go faster, and if there were clocks or a window in the casino you would have some idea of how long you have been gambling and would then start to think about leaving the casino instead if losing all track of time and spending all day and night in the casino. They do this because at some point you will start to get tired but be kept awake from the adrenalin from gambling, and at this point you can’t think straight, and you will start to spend money faster. Always remember the casinos are not there to make you dreams come true they are there to take you for all your money. Any time you leave the casino with some of the casinos money it was accidental.

Some of the tricks the casinos use to keep you gambling are:
No Windows
No Clocks
Ugly colors in the rugs and walls around the exits, and nice colors around the gamming areas will subliminally make you not want to go to those areas. The worse the odds of you winning the nicer the colors of that area will be.

By keeping this information in mind you will not be going home from the casinos and quitting your job but you will have more money in your pocket and you will have had a good time making that money.